JUKI TR6SNR (year 2009)

Only 1 LeftAvailable: In Stock

SKU: 6S9 - B1351

Categories: , ,

Tag:

THIS MACHINE IS A TRAY COMPONENT LOADING UNIT INSTALLED BY THE SIDE OF THE MOUNTER TO FEED COMPONENTS TO THE MOUNTER.
FEATURES:
– Two small and large types of suction pads are equipped in the head and shuttle as standard devices. This permits feeding       components of 5 mm ( suction surface ) to 50 mm ( dimension ).
– For the components that the pads cannot suction with vacuum, the shuttle is equipped with a BGA holder as a standard device. The     holder can hold and feed BGA or other shape of components.
– Two components can be fed simultaneously by the twin shuttle.
– The machine hasc a delay timer as a standard device that allows you to set the sensor’s delay time ( during which notches are   neglected by delaying the sensor OFF detection timing ) of the production PWBs that contain notches.
SPECIFICATIONS OF MACHINE:
Dimensions: 123x85x(h)144 (without guides) 123x135x(h)144 (with guides)
Air used:  0.5±0.05Mpa ( Pressure );   50 L/min ( ANR ) ( Consumption );  Atmospheric dew point – 17°C or lower ( Dry air ) Enviromental condition: Ambient temperature → +10°C to +35°C (under operation ); -15°C to +70°C (on transport or storage)  Humidity → 50%RH (35°C), 90%RH (20°C) (under operation);  20% to 95%RH (no condensation allowed) (on transport ot storage)
ELECTRICAL SPECIFICATIONS:
Power Supply → 200V AC, 900VA, 50/60 Hz
PRINTED BOARD SPECIFICATIONS:
Board Size
Minimum:
(X) 50mm × (Y) 30mm
Maximum:
(X)410mm × (Y)360mm
Board Thickness
0.4mm to 4.0mm
Board Warp Limit (Free state)
[with max. board size, for others, the value is proportional to diagonal lenght]
Upward:
Max. 2mm
Downward:
Max. 4mm